打印
加拿大政府将对从中国进口的钢铁和铝制品征收25%的附加税，自2024年10月22日起生效。附加税不适用于在该附加税生效当天正在运往加拿大的中国商品。
该附加税将适用于原产于中国的商品，这些商品应被视为符合《非CUSMA国家商品标记原产地确定条例》规定的中国商品。有关附加税管理的详细信息将在实施前发布于加拿大边境服务署网站：海关通知（cbsa-asfc.gc.ca）。
附加税适用的商品清单如下。描述仅供说明之用，其范围由第一栏中的关税项目确定。准确的描述请参阅加拿大海关关税的附表。
英文清单
| 钢制品 | |
| 海关税则号 | 描述 |
| 7206.10.00 | -Ingots |
| 7206.90.00 | -Other |
| 7207.11.00 | -Containing by weight less than 0.25% of carbon: --Of rectangular (including square) cross-section, the width measuring less than twice the thickness |
| 7207.12.00 | -Containing by weight less than 0.25% of carbon: --Other, of rectangular (other than square) cross-section |
| 7207.19.00 | -Containing by weight less than 0.25% of carbon: --Other |
| 7207.20.00 | -Containing by weight 0.25% or more of carbon |
| 7208.10.00 | -In coils, not further worked than hot-rolled, with patterns in relief |
| 7208.25.00 | -Other, in coils, not further worked than hot-rolled, pickled: --Of a thickness of 4.75 mm or more |
| 7208.26.00 | -Other, in coils, not further worked than hot-rolled, pickled: --Of a thickness of 3 mm or more but less than 4.75 mm |
| 7208.27.00 | -Other, in coils, not further worked than hot-rolled, pickled: --Of a thickness of less than 3 mm |
| 7208.36.00 | -Other, in coils, not further worked than hot-rolled: --Of a thickness exceeding 10 mm |
| 7208.37.00 | -Other, in coils, not further worked than hot-rolled: --D'une épaisseur de 4,75 mm ou plus mais n'excédant pas 10 mm |
| 7208.38.00 | -Other, in coils, not further worked than hot-rolled: --Of a thickness of 3 mm or more but less than 4.75 mm |
| 7208.39.00 | -Other, in coils, not further worked than hot-rolled: --Of a thickness of less than 3 mm |
| 7208.40.00 | -Not in coils, not further worked than hot-rolled, with patterns in relief |
| 7208.51.00 | -Other, not in coils, not further worked than hot-rolled: --Of a thickness exceeding 10 mm |
| 7208.52.00 | -Other, not in coils, not further worked than hot-rolled: --Of a thickness of 4.75 mm or more but not exceeding 10 mm |
| 7208.53.00 | -Other, not in coils, not further worked than hot-rolled: --Other, of a thickness of 3 mm or more but less than 4.75 mm |
| 7208.54.00 | -Other, not in coils, not further worked than hot-rolled: --Other, of a thickness of less than 3 mm |
| 7208.90.00 | -Other |
| 7209.15.00 | -In coils, not further worked than cold-rolled (cold-reduced): --Of a thickness of 3 mm or more |
| 7209.16.00 | -In coils, not further worked than cold-rolled (cold-reduced): --Of a thickness exceeding 1 mm but less than 3 mm |
| 7209.17.00 | -In coils, not further worked than cold-rolled (cold-reduced): --Of a thickness of 0.5 mm or more but not exceeding 1 mm |
| 7209.18.00 | -In coils, not further worked than cold-rolled (cold-reduced): --Of a thickness of less than 0.5 mm |
| 7209.25.00 | -Not in coils, not further worked than cold-rolled (cold-reduced): --Of a thickness of 3 mm or more |
| 7209.26.00 | -Not in coils, not further worked than cold-rolled (cold-reduced): --Of a thickness exceeding 1 mm but less than 3 mm |
| 7209.27.00 | -Not in coils, not further worked than cold-rolled (cold-reduced): --Of a thickness of 0.5 mm or more but not exceeding 1 mm |
| 7209.28.00 | -Not in coils, not further worked than cold-rolled (cold-reduced): --Of a thickness of less than 0.5 mm |
| 7209.90.00 | -Other |
| 7210.11.00 | -Plated or coated with tin: --Of a thickness of 0.5 mm or more |
| 7210.12.00 | -Plated or coated with tin: --Of a thickness of less than 0.5 mm |
| 7210.20.00 | -Plated or coated with lead, including terne-plate |
| 7210.30.00 | -Electrolytically plated or coated with zinc |
| 7210.41.00 | -Otherwise plated or coated with zinc: --Corrugated |
| 7210.49.00 | -Otherwise plated or coated with zinc: --Other |
| 7210.50.00 | -Plated or coated with chromium oxides or with chromium and chromium oxides |
| 7210.61.00 | -Plated or coated with aluminum: --Plated or coated with aluminum-zinc alloys |
| 7210.69.00 | -Plated or coated with aluminum: --Other |
| 7210.70.00 | -Painted, varnished or coated with plastics |
| 7210.90.00 | -Other |
| 7211.13.00 | -Not further worked than hot-rolled: --Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief |
| 7211.14.00 | -Not further worked than hot-rolled: --Other, of a thickness of 4.75 mm or more |
| 7211.19.00 | -Not further worked than hot-rolled: --Other |
| 7211.23.00 | -Not further worked than cold-rolled (cold-reduced): --Containing by weight less than 0.25% of carbon |
| 7211.29.00 | -Not further worked than cold-rolled (cold-reduced): --Other |
| 7211.90.00 | -Other |
| 7212.10.00 | -Plated or coated with tin |
| 7212.20.00 | -Electrolytically plated or coated with zinc |
| 7212.30.00 | -Otherwise plated or coated with zinc |
| 7212.40.00 | -Painted, varnished or coated with plastics |
| 7212.50.00 | -Otherwise plated or coated |
| 7212.60.00 | -Clad |
| 7213.10.00 | -Containing indentations, ribs, grooves or other deformations produced during the rolling process |
| 7213.20.00 | -Other, of free-cutting stee |
| 7213.91.00 | -Other : --Of circular cross-section measuring less than 14 mm in diameter |
| 7213.99.00 | -Other : --Other |
| 7214.20.00 | -Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling |
| 7214.30.00 | -Other, of free-cutting steel |
| 7214.91.00 | -Other --Of rectangular (other than square) cross-section |
| 7214.99.00 | -Other –Other |
| 7215.10.00 | -Of free-cutting steel, not further worked than cold-formed or coldfinished |
| 7215.50.00 | -Other, not further worked than cold-formed or cold-finished |
| 7215.90.00 | -Other |
| 7216.10.00 | -U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm |
| 7216.21.00 | -L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: --L sections |
| 7216.22.00 | -L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: --T sections |
| 7216.31.00 | -U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: --U sections |
| 7216.32.00 | -U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: --I sections |
| 7216.33.00 | -U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: --H sections |
| 7216.40.00 | -L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more |
| 7216.50.00 | -Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded |
| 7216.99.00 | -Other |
| 7217.10.00 | -Not plated or coated, whether or not polished |
| 7217.20.00 | -Plated or coated with zinc |
| 7217.30.00 | -Plated or coated with other base metals |
| 7217.90.00 | -Other |
| 7218.10.00 | -Ingots and other primary forms |
| 7218.91.00 | -Other: --Of rectangular (other than square) cross-section |
| 7218.99.00 | -Other: --Other |
| 7219.11.00 | -Not further worked than hot-rolled, in coils: --Of a thickness exceeding 10 mm |
| 7219.12.00 | -Not further worked than hot-rolled, in coils: --Of a thickness of 4.75 mm or more but not exceeding 10 mm |
| 7219.13.00 | -Not further worked than hot-rolled, in coils: --Of a thickness of 3 mm or more but less than 4.75 mm |
| 7219.14.00 | -Not further worked than hot-rolled, in coils: --Of a thickness of less than 3 mm |
| 7219.21.00 | -Not further worked than hot-rolled, not in coils: --Of a thickness exceeding 10 mm |
| 7219.22.00 | -Not further worked than hot-rolled, not in coils: --Of a thickness of 4.75 mm or more but not exceeding 10 mm |
| 7219.23.00 | -Not further worked than hot-rolled, not in coils: --Of a thickness of 3 mm or more but less than 4.75 mm |
| 7219.24.00 | -Not further worked than hot-rolled, not in coils: --Of a thickness of less than 3 mm |
| 7219.31.00 | -Not further worked than cold-rolled (cold-reduced): --Of a thickness of 4.75 mm or more |
| 7219.32.00 | -Not further worked than cold-rolled (cold-reduced): --Of a thickness of 3 mm or more but less than 4.75 mm |
| 7219.33.00 | -Not further worked than cold-rolled (cold-reduced): --Of a thickness exceeding 1 mm but less than 3 mm |
| 7219.34.00 | -Not further worked than cold-rolled (cold-reduced): --Of a thickness of 0.5 mm or more but not exceeding 1 mm |
| 7219.35.00 | -Not further worked than cold-rolled (cold-reduced): --Of a thickness of less than 0.5 mm |
| 7219.90.00 | -Other |
| 7220.12.00 | -Not further worked than hot-rolled: --Of a thickness of less than 4.75 mm |
| 7220.20.00 | -Not further worked than cold-rolled (cold-reduced) |
| 7220.90.00 | -Other |
| 7221.00.00 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel. |
| 7222.11.00 | -Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: --Of circular cross-section |
| 7222.19.00 | -Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: --Other |
| 7222.20.00 | -Bars and rods, not further worked than cold-formed or cold-finished |
| 7222.30.00 | -Other bars and rods |
| 7222.40.00 | -Angles, shapes and sections |
| 7223.00.00 | Wire of stainless steel. |
| 7224.10.00 | -Ingots and other primary forms |
| 7224.90.00 | -Other |
| 7225.11.00 | -Of silicon-electrical steel: --Grain-oriented |
| 7225.19.00 | -Of silicon-electrical steel: --Other |
| 7225.30.00 | -Other, not further worked than hot-rolled, in coils |
| 7225.40.00 | -Other, not further worked than hot-rolled, not in coils |
| 7225.50.00 | -Other, not further worked than cold-rolled (cold-reduced) |
| 7225.91.00 | -Other: --Electrolytically plated or coated with zinc |
| 7225.92.00 | -Other: --Otherwise plated or coated with zinc |
| 7225.99.00 | -Other: --Other |
| 7226.11.00 | -Of silicon-electrical steel: --Grain-oriented |
| 7226.19.00 | -Of silicon-electrical steel: --Other |
| 7226.20.00 | -Of high speed steel |
| 7226.91.00 | -Other: --Not further worked than hot-rolled |
| 7226.92.00 | -Other: --Not further worked than cold-rolled (cold-reduced) |
| 7226.99.00 | -Other: --Other |
| 7227.10.00 | -Of high speed steel |
| 7227.20.00 | -Of silico-manganese steel |
| 7227.90.00 | -Other |
| 7228.20.00 | -Bars and rods, of silico-manganese steel |
| 7228.30.00 | -Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded |
| 7228.40.00 | -Other bars and rods, not further worked than forged |
| 7228.50.00 | -Other bars and rods, not further worked than cold-formed or coldfinished |
| 7228.60.00 | -Other bars and rods |
| 7228.70.00 | -Angles, shapes and sections |
| 7229.20.00 | -Of silico-manganese steel |
| 7229.90.00 | -Other |
| 7301.10.00 | -Sheet piling |
| 7302.10.00 | -Rails |
| 7302.40.00 | -Fish-plates and sole plates |
| 7302.90.00 | -Other |
| 7304.11.00 | -Line pipe of a kind used for oil or gas pipelines: --Of stainless steel |
| 7304.19.00 | -Line pipe of a kind used for oil or gas pipelines: --Other |
| 7304.22.00 | -Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: --Drill pipe of stainless steel |
| 7304.23.00 | -Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: --Other drill pipe |
| 7304.24.00 | -Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: --Other, of stainless steel |
| 7304.29.00 | -Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: --Other |
| 7304.31.00 | -Other, of circular cross-section, of iron or non-alloy steel: --Cold-drawn or cold-rolled (cold-reduced) |
| 7304.39.00 | -Other, of circular cross-section, of iron or non-alloy steel: --Other |
| 7304.49.00 | -Other, of circular cross-section, of stainless steel: --Other |
| 7304.51.00 | -Other, of circular cross-section, of other alloy steel: --Cold-drawn or cold-rolled (cold-reduced) |
| 7304.59.00 | -Other, of circular cross-section, of other alloy steel: --Other |
| 7304.90.00 | -Other |
| 7305.11.00 | -Line pipe of a kind used for oil or gas pipelines: --Longitudinally submerged arc welded |
| 7305.12.00 | -Line pipe of a kind used for oil or gas pipelines: --Other, longitudinally welded |
| 7305.19.00 | -Line pipe of a kind used for oil or gas pipelines: --Other |
| 7305.20.00 | -Casing of a kind used in drilling for oil or gas |
| 7305.31.00 | -Other, welded: --Longitudinally welded |
| 7305.39.00 | -Other, welded: --Other |
| 7305.90.00 | -Other |
| 7306.11.00 | -Line pipe of a kind used for oil or gas pipelines: --Welded, of stainless steel |
| 7306.19.00 | -Line pipe of a kind used for oil or gas pipelines: --Other |
| 7306.21.00 | -Casing and tubing of a kind used in drilling for oil or gas: --Welded, of stainless steel |
| 7306.29.00 | -Casing and tubing of a kind used in drilling for oil or gas: --Other |
| 7306.30.00 | -Other, welded, of circular cross-section, of iron or non-alloy steel |
| 7306.40.00 | -Other, welded, of circular cross-section, of stainless steel |
| 7306.50.00 | -Other, welded, of circular cross-section, of other alloy steel |
| 7306.61.00 | -Other, welded, of non-circular cross-section: --Of square or rectangular cross-section |
| 7306.69.00 | -Other, welded, of non-circular cross-section: --Of other non-circular cross-section |
| 7306.90.00 | -Other |
| 铝 | |
| 海关税则号 | 描述 |
| 7601.10.00 | -Aluminum, not alloyed |
| 7601.20.00 | -Aluminum alloys |
| 7604.10.00 | -Of aluminum, not alloyed |
| 7604.21.00 | -Of aluminum alloys: --Hollow profiles |
| 7604.29.00 | -Of aluminum alloys: --Other |
| 7605.11.00 | -Of aluminum, not alloyed: --Of which the maximum cross-sectional dimension exceeds 7 mm |
| 7605.19.00 | -Of aluminum, not alloyed: --Other |
| 7605.21.00 | -Of aluminum alloys: --Of which the maximum cross-sectional dimension exceeds 7 mm |
| 7605.29.00 | -Of aluminum alloys: --Other |
| 7606.11.00 | -Rectangular (including square): --Of aluminum, not alloyed |
| 7606.12.00 | -Rectangular (including square): --Of aluminum alloys |
| 7606.91.00 | -Other: --Of aluminum, not alloyed |
| 7606.92.00 | -Other: --Of aluminum alloys |
| 7607.11.00 | -Not backed: --Rolled but not further worked |
| 7607.19.00 | -Not backed: --Other |
| 7607.20.00 | -Backed |
| 7608.10.00 | -Of aluminum, not alloyed |
| 7608.20.00 | -Of aluminum alloys |
| 7609.00.00 | Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves). |
中文版本清单
| 钢材制品 | |
| 海关税则号 | 描述 |
| 7206.10.00 | -锭 |
| 7206.90.00 | -其他 |
| 7207.11.00 | — 含碳量按重量计低于 0.25%：— 横截面积为矩形（包括正方形），宽度小于厚度的两倍 |
| 7207.12.00 | -按重量计含碳量少于 0.25%：--其他，横截面为矩形（正方形除外） |
| 7207.19.00 | — 含碳量按重量计少于 0.25%：— 其他 |
| 7207.20.00 | -按重量计含碳量为0.25％或更多 |
| 7208.10.00 | -卷材，未经热轧进一步加工，带浮雕图案 |
| 7208.25.00 | — 其他，卷材，除热轧、酸洗外未进一步加工：——厚度为 4.75 毫米或以上 |
| 7208.26.00 | — 其他，卷状，除热轧、酸洗外未进一步加工：——厚度为 3 毫米或以上，但小于 4.75 毫米 |
| 7208.27.00 | — 其他，卷状，除热轧、酸洗外未进一步加工：——厚度小于 3 毫米 |
| 7208.36.00 | — 其他，卷材，除热轧外未进一步加工：——厚度超过 10 毫米 |
| 7208.37.00 | -其他卷材，未经过热轧后进一步加工：--D'une épaisseur de 4,75 mm ou plus mais n'excédant pas 10 mm |
| 7208.38.00 | — 其他，卷材，除热轧外未进一步加工：——厚度为 3 毫米或以上，但小于 4.75 毫米 |
| 7208.39.00 | — 其他，卷状，除热轧外未进一步加工：——厚度小于 3 毫米 |
| 7208.40.00 | -非卷材，未经过热轧以外的进一步加工，且具有浮雕图案 |
| 7208.51.00 | — 其他，非卷状，除热轧外未进一步加工：——厚度超过 10 毫米 |
| 7208.52.00 | — 其他，非卷状，除热轧外未进一步加工：——厚度为 4.75 毫米或以上，但不超过 10 毫米 |
| 7208.53.00 | — 其他，非卷状，除热轧外未进一步加工：——其他，厚度为 3 毫米或以上但小于 4.75 毫米 |
| 7208.54.00 | — 其他，非卷状，除热轧外未进一步加工：——其他，厚度小于 3 毫米 |
| 7208.90.00 | -其他 |
| 7209.15.00 | - 卷材，除冷轧（冷轧）外未进一步加工：--厚度为 3 毫米或以上 |
| 7209.16.00 | - 卷材，除冷轧（冷轧）外未进一步加工：--厚度超过 1 毫米但小于 3 毫米 |
| 7209.17.00 | - 卷材，除冷轧（冷轧）外未进一步加工：--厚度为 0.5 毫米或以上，但不超过 1 毫米 |
| 7209.18.00 | - 卷材，除冷轧（冷轧）外未进一步加工：--厚度小于 0.5 毫米 |
| 7209.25.00 | - 非卷材，除冷轧（冷轧）外未进一步加工：-- 厚度为 3 毫米或以上 |
| 7209.26.00 | — 非卷材，除冷轧（冷轧）外未进一步加工：——厚度超过 1 毫米但小于 3 毫米 |
| 7209.27.00 | — 非卷材，除冷轧（冷轧）外未进一步加工：——厚度为 0.5 毫米或以上，但不超过 1 毫米 |
| 7209.28.00 | — 非卷材，除冷轧（冷轧）外未进一步加工：——厚度小于 0.5 毫米 |
| 7209.90.00 | -其他 |
| 7210.11.00 | -镀锡或涂锡：--厚度为 0.5 毫米或以上 |
| 7210.12.00 | -镀或涂有锡：--厚度小于0.5毫米 |
| 7210.20.00 | -镀铅或涂铅，包括镀铅锡板 |
| 7210.30.00 | -电镀或涂锌 |
| 7210.41.00 | - 以其他方式镀或涂锌：--波纹 |
| 7210.49.00 | - 以其他方式镀或涂锌：--其他 |
| 7210.50.00 | -镀或涂有氧化铬或铬和氧化铬 |
| 7210.61.00 | -镀或涂有铝：--镀或涂有铝锌合金 |
| 7210.69.00 | -镀铝或涂铝：--其他 |
| 7210.70.00 | -涂漆、上漆或涂有塑料 |
| 7210.90.00 | -其他 |
| 7211.13.00 | — 除热轧外未进一步加工：— 四面轧制或在封闭的箱式轧制中轧制，宽度超过 150 毫米，厚度不小于 4 毫米，非卷状且无浮雕图案 |
| 7211.14.00 | — 除热轧外未进一步加工：——其他，厚度为 4.75 毫米或以上 |
| 7211.19.00 | - 除热轧外未进一步加工：--其他 |
| 7211.23.00 | — 未经冷轧（冷轧）进一步加工：——按重量计算含碳量低于 0.25% |
| 7211.29.00 | - 除冷轧（冷轧）外未进一步加工：--其他 |
| 7211.90.00 | -其他 |
| 7212.10.00 | -镀锡或涂锡 |
| 7212.20.00 | -电镀或涂锌 |
| 7212.30.00 | -以其他方式镀锌或涂锌 |
| 7212.40.00 | -涂漆、上漆或涂有塑料 |
| 7212.50.00 | 否则镀层或涂层 |
| 7212.60.00 | -包覆 |
| 7213.10.00 | -含有在轧制过程中产生的压痕、肋条、凹槽或其他变形 |
| 7213.20.00 | -其他易切削钢 |
| 7213.91.00 | -其他：--圆形横截面直径小于14毫米 |
| 7213.99.00 | -其他 : --其他 |
| 7214.20.00 | -含有在轧制过程中产生的压痕、肋条、沟槽或其他变形，或轧制后扭曲 |
| 7214.30.00 | -其他，易切削钢 |
| 7214.91.00 | -其他--横截面为矩形（正方形除外） |
| 7214.99.00 | -其他 –其他 |
| 7215.10.00 | -由易切削钢制成，除冷成型或冷精加工外未进一步加工 |
| 7215.50.00 | -其他，除冷成型或冷精加工外未进一步加工 |
| 7215.90.00 | -其他 |
| 7216.10.00 | -U、I 或 H 型钢，除热轧、热拉或挤压外未进一步加工，高度小于 80 毫米 |
| 7216.21.00 | -L 型钢或 T 型钢，除热轧、热拉或挤压外未进一步加工，高度小于 80 毫米：--L 型钢 |
| 7216.22.00 | -L 型钢或 T 型钢，除热轧、热拉或挤压外未进一步加工，高度小于 80 毫米：--T 型钢 |
| 7216.31.00 | -U 型钢、I 型钢或 H 型钢，除热轧、热拉或挤压外未进一步加工，高度为 80 毫米或以上：--U 型钢 |
| 7216.32.00 | -U、I 或 H 型钢，除热轧、热拉或挤压外未进一步加工，高度为 80 毫米或以上：--I 型钢 |
| 7216.33.00 | -U、I 或 H 型钢，除热轧、热拉或挤压外未进一步加工，高度为 80 毫米或以上：--H 型钢 |
| 7216.40.00 | -L 型钢或 T 型钢，除热轧、热拉或挤压外未进一步加工，高度为 80 毫米或以上 |
| 7216.50.00 | - 其他角钢、型钢及型材，除热轧、热拉或热挤压外未进一步加工 |
| 7216.99.00 | -其他 |
| 7217.10.00 | 未镀层或涂层，无论是否抛光 |
| 7217.20.00 | -镀锌或涂锌 |
| 7217.30.00 | -镀或涂有其他贱金属 |
| 7217.90.00 | -其他 |
| 7218.10.00 | - 锭材及其他初级形态 |
| 7218.91.00 | -其他：--横截面为矩形（正方形除外） |
| 7218.99.00 | -其他：--其他 |
| 7219.11.00 | — 未经进一步加工，热轧卷材：— 厚度超过 10 毫米 |
| 7219.12.00 | — 未经进一步加工，热轧卷材：— 厚度为 4.75 毫米或以上，但不超过 10 毫米 |
| 7219.13.00 | — 未经进一步加工，热轧卷材：— 厚度为 3 毫米或以上，但小于 4.75 毫米 |
| 7219.14.00 | — 未经进一步加工，热轧卷材：— 厚度小于 3 毫米 |
| 7219.21.00 | — 除热轧外未进一步加工，非卷材：——厚度超过 10 毫米 |
| 7219.22.00 | — 未经进一步加工，热轧，非卷材：——厚度为 4.75 毫米或以上，但不超过 10 毫米 |
| 7219.23.00 | — 未经进一步加工，热轧，非卷材：— 厚度为 3 毫米或以上，但小于 4.75 毫米 |
| 7219.24.00 | — 除热轧外未进一步加工，非卷材：——厚度小于 3 毫米 |
| 7219.31.00 | — 除冷轧（冷轧）外未进一步加工：— 厚度为 4.75 毫米或以上 |
| 7219.32.00 | - 未经冷轧（冷轧）进一步加工：- 厚度为 3 毫米或以上但小于 4.75 毫米 |
| 7219.33.00 | — 未经冷轧（冷轧）进一步加工：— 厚度超过 1 毫米但小于 3 毫米 |
| 7219.34.00 | - 未经冷轧（冷轧）进一步加工：- 厚度为 0.5 毫米或以上，但不超过 1 毫米 |
| 7219.35.00 | — 未经冷轧（冷轧）进一步加工：— 厚度小于 0.5 毫米 |
| 7219.90.00 | -其他 |
| 7220.12.00 | — 除热轧外未进一步加工：— 厚度小于 4.75 毫米 |
| 7220.20.00 | - 除冷轧（冷轧）外未进行进一步加工 |
| 7220.90.00 | -其他 |
| 7221.00.00 | 不锈钢热轧棒材及杆材，卷成不规则形状。 |
| 7222.11.00 | - 棒材和杆材，除热轧、热拉或挤压外未进一步加工：-- 圆形横截面 |
| 7222.19.00 | - 棒材和杆材，除热轧、热拉或挤压外未进一步加工：--其他 |
| 7222.20.00 | -棒材和杆材，除冷成型或冷精加工外未进一步加工 |
| 7222.30.00 | -其他棒材 |
| 7222.40.00 | -角度、形状和截面 |
| 7223.00.00 | 不锈钢丝。 |
| 7224.10.00 | - 锭材及其他初级形态 |
| 7224.90.00 | -其他 |
| 7225.11.00 | -硅电工钢：--取向 |
| 7225.19.00 | -硅电钢：--其他 |
| 7225.30.00 | -其他，除热轧外未进一步加工，卷材 |
| 7225.40.00 | -其他，除热轧外未进一步加工，非卷材 |
| 7225.50.00 | -其他，除冷轧（冷轧）外未进一步加工 |
| 7225.91.00 | -其他：--电镀或涂锌 |
| 7225.92.00 | -其他：--以其他方式镀或涂锌 |
| 7225.99.00 | -其他：--其他 |
| 7226.11.00 | -硅电工钢：--取向 |
| 7226.19.00 | -硅电钢：--其他 |
| 7226.20.00 | -采用高速钢制成 |
| 7226.91.00 | -其他：--除热轧外未进一步加工 |
| 7226.92.00 | -其他：--除冷轧（冷轧）外未进一步加工 |
| 7226.99.00 | -其他：--其他 |
| 7227.10.00 | -采用高速钢制成 |
| 7227.20.00 | -硅锰钢 |
| 7227.90.00 | -其他 |
| 7228.20.00 | - 硅锰钢棒材和杆材 |
| 7228.30.00 | -其他棒材，除热轧、热拉或挤压外未进一步加工 |
| 7228.40.00 | -其他棒材，除锻造外未进一步加工 |
| 7228.50.00 | -其他棒材及杆材，除冷成型或冷精加工外未进一步加工 |
| 7228.60.00 | -其他棒材 |
| 7228.70.00 | -角度、形状和截面 |
| 7229.20.00 | -硅锰钢 |
| 7229.90.00 | -其他 |
| 7301.10.00 | -钢板桩 |
| 7302.10.00 | -轨道 |
| 7302.40.00 | -鱼尾板和底板 |
| 7302.90.00 | -其他 |
| 7304.11.00 | - 用于石油或天然气管道的管线管：--不锈钢管 |
| 7304.19.00 | - 用于石油或天然气管道的管线管：--其他 |
| 7304.22.00 | - 用于石油或天然气钻探的套管、油管和钻杆：--不锈钢钻杆 |
| 7304.23.00 | - 用于石油或天然气钻探的套管、油管及钻杆：--其他钻杆 |
| 7304.24.00 | - 用于石油或天然气钻探的套管、油管和钻杆：-- 其他不锈钢制 |
| 7304.29.00 | - 用于石油或天然气钻探的套管、油管和钻杆：--其他 |
| 7304.31.00 | - 其他圆形横截面的铁或非合金钢：--冷拉或冷轧（冷轧） |
| 7304.39.00 | -其他，圆形横截面，铁或非合金钢：--其他 |
| 7304.49.00 | -其他，圆形横截面，不锈钢材质：--其他 |
| 7304.51.00 | -其他，圆形横截面，其他合金钢：--冷拉或冷轧（冷轧） |
| 7304.59.00 | -其他，圆形横截面，其他合金钢制：--其他 |
| 7304.90.00 | -其他 |
| 7305.11.00 | - 用于石油或天然气管道的管线管：- 直缝埋弧焊管 |
| 7305.12.00 | - 用于石油或天然气管道的管线管：- 其他，纵向焊接 |
| 7305.19.00 | - 用于石油或天然气管道的管线管：--其他 |
| 7305.20.00 | -用于石油或天然气钻探的一种套管 |
| 7305.31.00 | -其他，焊接：--纵向焊接 |
| 7305.39.00 | -其他，焊接：--其他 |
| 7305.90.00 | -其他 |
| 7306.11.00 | - 用于石油或天然气管道的管线管：--焊接的不锈钢管 |
| 7306.19.00 | - 用于石油或天然气管道的管线管：--其他 |
| 7306.21.00 | 用于石油或天然气钻探的套管和油管：-- 焊接的，不锈钢材质 |
| 7306.29.00 | - 用于石油或天然气钻探的套管和油管：--其他 |
| 7306.30.00 | -其他，铁或非合金钢焊接，圆形横截面 |
| 7306.40.00 | -其他，焊接，圆形横截面，不锈钢制 |
| 7306.50.00 | -其他合金钢制焊接圆形截面管 |
| 7306.61.00 | - 其他非圆形截面焊接钢管：--正方形或矩形截面钢管 |
| 7306.69.00 | - 其他非圆形截面焊接钢管：--其他非圆形截面焊接钢管 |
| 7306.90.00 | -其他 |
| 铝 | |
| 海关税则号 | 描述 |
| 7601.10.00 | -铝，非合金 |
| 7601.20.00 | -铝合金 |
| 7604.10.00 | -由铝合金制成，非合金 |
| 7604.21.00 | -铝合金：--空心型材 |
| 7604.29.00 | -铝合金：--其他 |
| 7605.11.00 | — 非合金铝合金：— 其最大横截面积尺寸超过 7 毫米 |
| 7605.19.00 | -非合金铝：--其他 |
| 7605.21.00 | — 铝合金：— 最大横截面积尺寸超过 7 毫米 |
| 7605.29.00 | -铝合金：--其他 |
| 7606.11.00 | -矩形（包括正方形）：--铝合金，非合金 |
| 7606.12.00 | -矩形（包括正方形）：--铝合金 |
| 7606.91.00 | -其他：--非合金铝 |
| 7606.92.00 | -其他：--铝合金 |
| 7607.11.00 | -无背衬：--已轧制但未进一步加工 |
| 7607.19.00 | -不支持： --其他 |
| 7607.20.00 | -支持 |
| 7608.10.00 | -由铝合金制成，非合金 |
| 7608.20.00 | -铝合金 |
| 7609.00.00 | 铝管或管件（例如，接头、弯头、套管）。 |
皖ICP备2024046534号-1
皖公网安备34019202002351号
支持扩展名：.jpg.png.jpeg.doc.excel.word.pdf
文件大小最大支持10M
